Wacom cintiq 13HD Manuel d'utilisateur télécharger pdf (Page 55)

Index

Contents

TESTING CINTIQ

1. If the Cintiq status LED does not light, check the following:

• First verify that the light on the power adapter is on. If the light is not on, check that the power cable

is properly connected between the power adapter and an active AC outlet.

• Check that the power adapter cable is securely connected to the Cintiq power cable, and that the

Cintiq is turned on. The status LED will glow white whenever the Cintiq is turned on. The dimmer

light indicates that a video signal is being received. The light will brighten when you touch the pen to

the display surface.

Important: Use only an AC adapter specified for use with your Cintiq. Other adapters may cause

damage to your product.

2. If there is no display:

• Make sure that your computer is turned on. The status LED will glow white when the proper video

signal is received.

• Verify that the Cintiq is connected to an active digital video port.

• Check that your video card has been properly installed and is functional. If you have another display

that is compatible with your video card, you can connect that display to the card in order to verify

that the video card is operating correctly.

3. Verify that the pen and the tablet portion of your Cintiq are working:

• Press the pen tip against the display and verify that the status LED lights white.

• If the LED does not light, verify that the USB cable is plugged into an active USB port. If the Cintiq is

plugged into a USB hub, try plugging it directly into the USB port on your computer.

• Be sure that the USB port to which you are connecting has not been disabled. It may be necessary

to check your system BIOS setting to verify that you have connected the Cintiq to an active USB

port.

• The status LED will light white when Cintiq is registered as a USB device and the pen tip is pressed

against the display.

4. Check the pen. If you cannot make a selection on the screen with the pen:

• Test the pen by pressing the pen tip or eraser against the surface of the Cintiq. The status LED

should light white.

• Now, without applying pressure to the pen tip but keeping the pen within 5 mm (0.2 inch) of the

Cintiq surface, press the side switch. The status LED should again light white.

• If the status LED does not light for these tests, be sure you are using a pen specified for use with

your product.

•See testing controls and input tools

and testing a pen for more information.

5. Check the ExpressKeys and Rocker Ring. See testing controls and input tools

and Testing the

ExpressKeys, Rocker Ring and Home Button.

6. Check any other tool(s), such as the optional Airbrush. See testing controls and input tools

If you are still having problems, you may have a defective pen or Cintiq.

After testing, use the Wacom Tablet control panel to reconfigure your tablet and tools for any custom

settings you may originally have been using.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 86 87

Commentaires sur ces manuels

Pas de commentaire

Wacom cintiq 13HD Manuel d'utilisateur Page 55

Commentaires sur ces manuels

Produits connexes et manuels pour Tablettes graphiques Wacom cintiq 13HD